Quick Answer

A unit converter changes a measurement from one unit to another, such as kilometres to miles, Celsius to Fahrenheit, or kilograms to pounds. You enter a value, pick the units, and get an instant result. Browser-based converters do the arithmetic on your device for length, weight, temperature, speed, area, and volume. The traps to watch for are US versus imperial volumes, temperature offsets, and squared or cubed units.

A unit converter changes a measurement from one unit to another, and you need one whenever a value in one system has to be understood in another, from converting kilometres to miles for a trip to Celsius to Fahrenheit for a recipe. Because the world runs on two main measurement systems plus dozens of specialist units, these small conversions come up constantly in work and daily life. A free online converter does the arithmetic instantly and correctly, so you avoid slow mental maths and costly mistakes. Here is when each common converter earns its keep.

When Do You Need a Length Converter?

You need a length converter whenever you cross between metric and imperial units, which happens more often than you would think. Ordering furniture listed in inches when you measured in centimetres, reading a hiking trail marked in miles when you think in kilometres, or following a build guide in feet all call for a quick conversion.

Professionals rely on it too. Engineers, architects, and tradespeople constantly translate between systems when working with international suppliers or clients. A converter removes the risk of a slip that could mean a part that does not fit or a wall in the wrong place. The modern metric system, the International System of Units, is defined and maintained internationally by the BIPM.

Convert Length Instantly

Switch between millimetres, metres, feet, inches, miles, nautical miles, and more with our free Length Converter. Instant, accurate, no signup.

Open Length Converter →

Why Are Weight and Temperature Converters So Common?

Two of the most-used converters solve everyday problems in the kitchen, on the scales, and in the clinic.

Weight converter

A weight converter turns kilograms into pounds, grams into ounces, and back again. Cooks use it to follow recipes written for another country, travellers use it for luggage limits, and anyone tracking fitness uses it to compare figures given in different units. In healthcare and shipping, accurate weight conversion is part of the daily routine.

Temperature converter

A temperature converter handles the awkward relationship between Celsius and Fahrenheit. Unlike most units, these two do not share a zero, so the conversion needs both a multiplier and an offset, which is easy to fumble in your head. Whether you are setting an oven from a foreign recipe, reading an overseas weather forecast, or doing science homework, the converter applies the right formula every time.

Weight and Temperature Made Easy

Use the Weight Converter for kilograms, pounds, and ounces, and the Temperature Converter for Celsius, Fahrenheit, and Kelvin. Both free.

Open Temperature Converter →

Where Do Speed, Area, and Volume Converters Help?

Beyond the basics, three more converters handle specific but common jobs.

Speed converter

A speed converter switches between kilometres per hour, miles per hour, metres per second, and knots. Drivers crossing borders, runners comparing pace, sailors and pilots reading instruments, and anyone reading a foreign speed limit all reach for it. It keeps you safe and legal when the signs use units you are not used to.

Area converter

An area converter turns square metres into square feet, acres into hectares, and more. It is essential in property and land, where a listing, a quote for flooring or turf, or an international land size only makes sense once it is in units you recognise. Estate agents, farmers, and renovators use it constantly.

Volume converter

A volume converter handles millilitres, litres, cubic metres, teaspoons, tablespoons, cups, pints, quarts, gallons, and fluid ounces. Cooking is the obvious case, since recipes travel across borders and measuring systems, but it also matters for fuel, chemicals, and any liquid measured differently in different places. It takes the guesswork out of scaling a recipe or filling a tank.

Convert Speed, Area, and Volume

Try the Speed Converter, Area Converter, and Volume Converter, or see them all on the converters hub.

See All Converters →

Which Conversion Factors Are Exact?

Most of the factors you use every day are not measurements at all. They are definitions. Since the 1959 international yard and pound agreement, the inch has been exactly 25.4 mm and the avoirdupois pound exactly 0.45359237 kg, as listed in NIST Handbook 44, Appendix C. The rest of the imperial and US customary families hang off those two numbers:

  • 1 foot = 12 inches = 0.3048 m exactly, so 1 mile = 5,280 ft = 1,609.344 m exactly.
  • 1 international nautical mile = 1,852 m exactly (a separate definition adopted in 1929, also listed in Handbook 44).
  • 1 stone = 14 lb = 6.35029318 kg exactly.
  • 1 US gallon = 231 cubic inches exactly, which works out to 3.785411784 L.

Because these are exact, the approximations you remember (2.2 lb per kg, 1.6 km per mile) are the only source of error. The site's Length and Weight converters store the exact definitions (0.0254 m per inch, 453.59237 g per pound), so the only rounding you see is in the display.

Why Is a US Gallon Different From a UK Gallon?

Volume is where shared names hide different sizes. The imperial gallon used in the UK is exactly 4.54609 L (NIST SP 811, Appendix B.9), about 20% more than the 3.785411784 L US gallon. On top of that, the imperial gallon is split into 160 fluid ounces and the US gallon into 128, so the ounces differ too:

UnitUSUK (imperial)
Gallon3.785 L4.546 L
Pint473.2 mL (16 fl oz)568.3 mL (20 fl oz)
Fluid ounce29.57 mL28.41 mL

A practical example: 50 L of fuel is 13.21 US gallons but only 11.00 imperial gallons. That is why a UK car review quoting miles per gallon shows a figure about 20% higher than a US review of the same car. The fluid ounce runs the other way: a UK fluid ounce is slightly smaller than a US one, so a recipe calling for 10 fl oz means 284 mL in London and 296 mL in New York. The site's Volume Converter lists US gallon, US fluid ounce, UK gallon, and UK fluid ounce as separate units; its cup, pint, and quart options are the US sizes, so pick deliberately.

Why Can't You Convert Temperature by Multiplying?

Celsius and Fahrenheit place zero at different points, so the formula has two steps: °F = °C × 1.8 + 32, and °C = (°F − 32) ÷ 1.8. The offset is what makes temperature different from every other converter on this page.

The trap most people fall into is converting a change in temperature with that same formula. A temperature difference has no offset. A 10 °C rise is an 18 °F rise (10 × 1.8), not the 50 °F you get by feeding 10 °C into the full formula. NIST SP 811 lists this separately as a "temperature interval", where 1 °F equals 5/9 of a degree Celsius or kelvin. So if a forecast says tomorrow will be 5 °C warmer, that is 9 °F warmer, whatever the starting temperature. The Temperature Converter converts readings, not intervals, and covers Celsius, Fahrenheit, Kelvin, Rankine, and the historical Delisle, Réaumur, and Rømer scales.

Why Do Area and Volume Conversions Go Wrong?

An area unit is a length unit squared, so the factor is squared too. One metre is 3.2808 ft, but one square metre is 3.2808 × 3.2808 = 10.7639 ft². The common slip is to multiply square metres by 3.28: a 100 m² flat becomes "328 ft²" when the real figure is 1,076 ft², more than three times larger. Volume cubes the factor, so 1 m³ is 35.31 ft³, not 3.28.

The quick check: if you are converting square units and your factor looks like a plain length factor, it is wrong. One square foot is exactly 0.09290304 m² (0.3048 squared). The Area Converter handles mm², cm², m², km², in², ft², yd², acres, hectares, and square miles, so you never have to square anything by hand.

How Do You Convert Speed Units Quickly?

Speed combines a length and a time, which gives you a few clean shortcuts:

  • km/h to m/s: divide by 3.6, because 1,000 m ÷ 3,600 s = 1/3.6. A car at 90 km/h is moving at 25 m/s, so it covers 25 m during a one-second reaction time.
  • Knots to km/h: multiply by 1.852 exactly, since a knot is one nautical mile per hour. A boat doing 30 knots is at 55.56 km/h.
  • mph to km/h: multiply by 1.609344 exactly. 60 mph is 96.56 km/h.

The Speed Converter also offers feet per second and Mach. Treat Mach as a rough figure: the tool uses a fixed 340.29 m/s, while the real speed of sound changes with air temperature, so Mach is not a fixed speed the way a knot is.

How Many Decimal Places Should You Keep?

A converter will happily give you six decimal places, but the answer can never be more precise than what you measured. If you measured a shelf as 71 inches with a tape, the exact conversion is 180.34 cm, yet 180 cm is the honest figure, because your tape reading was only good to about an inch. Writing 180.34 cm implies you measured to a tenth of a millimetre.

Two rules cover most cases. First, round only at the end, not at each intermediate step, or small errors stack up across a chain of conversions. Second, keep roughly the same number of significant figures as your input: a recipe's "250 g" becomes about 8.8 oz, not 8.818490 oz. The exception is a figure that is a definition or a legal limit, where you keep the precision the rule specifies.

What Happens When a Unit Conversion Goes Wrong?

A well-documented case is NASA's Mars Climate Orbiter, lost on 23 September 1999. According to the Mishap Investigation Board Phase I Report, a ground software file called "Small Forces" reported thruster impulse in pound-force seconds when the navigation team expected newton seconds. The values were low by a factor of 4.45, because one pound-force is about 4.45 N. The accumulated error put the spacecraft on a path with a closest approach of about 57 km above Mars, against a minimum survivable altitude of 80 km.

The lesson for everyday work: write the unit next to every number you hand to someone else, including in spreadsheet columns and file headers. A bare "4.2" invites the next person to assume a unit.

Why Use a Converter Instead of Mental Maths?

Unit conversion looks simple until a wrong factor or a misplaced decimal turns a recipe, a build, or a dose into a mistake. A converter uses the correct, standard factors every time and shows the result instantly, which is faster and far safer than mental maths. Keep the converters you use most within reach, whether that is length and weight for daily life or area and volume for your trade, and let them handle the numbers accurately. Head over to the free unit converter hub to try the conversions yourself and see how quickly the results update as you type.

Frequently Asked Questions

What is a unit converter used for?

A unit converter changes a measurement from one unit to another, such as kilometres to miles or Celsius to Fahrenheit. People use them for cooking, travel, DIY, study, and work in fields like engineering, healthcare, and logistics, anywhere a value in one system needs to be understood in another. A free online converter does the maths instantly and accurately.

When do you need a length or area converter?

You need a length converter when working across metric and imperial systems, for example converting centimetres to inches for a furniture order or kilometres to miles when travelling. An area converter helps with property, land, and flooring, turning square metres into square feet or acres into hectares so quotes and listings make sense to everyone.

Why is temperature conversion tricky?

Temperature is trickier than most units because Celsius and Fahrenheit do not share a zero point, so you cannot just multiply by a single factor. The conversion involves both a multiplier and an offset, which is easy to get wrong by hand. A converter applies the correct formula every time. For a temperature change rather than a reading, skip the offset: a 10 °C rise is an 18 °F rise, not 50 °F.

Are online unit converters accurate?

A good online unit converter uses standard, precise conversion factors, so the results are accurate for everyday and most professional use. For safety-critical or scientific work, always confirm against an authoritative reference such as NIST and mind the number of decimal places you need. The tools here run in your browser and show clear, immediate results.